SCHLEGELMULCHER - Series SM

 

 

SM SMB SMU CNV TCL PKU

 

Equipment in issue and merits
  • Very robust and pretentious machine for professionals.
  • Central case made of highest quality rolled metal resistant to consumption (5 mm), strengthened in critical points.
  • Side-plates of 10 mm.
  • Form of case lengthened forwards, in order to avoid the casting of stones or cut material and to protect the operator on the tractor.
  • Protective curtain (5 mm) against the casting of stones, mounted as frontal protection in the way of pendulum.
  • Gear box with installed freewheel, adjustment 540 rotations/ min (750 or 1000 on demand).
  • Front rolls, adjustable in height, and broad back-roll Ø 160, adjustable in height, for easy side- shifting and manoeuvring.
  • Attachment of the 3. point, category I/ II, adjustable, withself-lubricating gliding- jaws.
  • Mechanical linear lateral adjustment (40 cm)
  • Large swinging bearings made of special steel bearing bowls (impressed), mounted for the shaft of the rotor.
  • Cutting tools having the form of a forged universal sledge-hammer made of special steel in order to grant the highest resistance and reliability, even with hard works, optimal for the crumbling of grass, wood (Ø max. 150 mm), stalks of Indian corn, straw etc. with counter-blades (tearer).
  • Safety- protections and EC- Certification.

 

Model Working-breadth Total breadth Number of sledge-hammers Number of Y - blades Weight
SM 1250 1,25 m 1,40 m 9 27 440 kg
SM 1500 1,50 m 1,65 m 9 27 480 kg
SM 1750 1,75 m 1,90 m 12 36 530 kg
SM 2000 2,00 m 2,15 m 12 36 570 kg
SM 2250 2,25 m 2,40 m 15 45 620 kg
SM 2500 2,50 m 2,65 m 15 45 660 kg
SM 2750 2,75 m 2,90 m 18 54 710 kg

Accessories

Picture. A

Picture. B

Picture. C

Picture. D

Picture. E
  • Hydraulic side- shifting (40 cm) with tubes of attachment and rapid clutches
  • Hydraulic side- shifting (60 cm) with tubes of attachment and rapid clutches
  • Hydraulic side wheel (60 cm) with pump, tank / oil (about 70 l), oil- engine, and tubes of attachment (Picture A)
  • Automatic hydraulic feeler for side wheel with double pump, distributor, cylinder etc.
  • Kit remote control- device – drawing- back of the side wheel
  • Electric oil- radiator
  • Turn over frame for the front and back attachment and gear box with continued entrance shaft
  • Double frame for the front and back attachment and reduction gear with continued entrance shaft
  • Special gear box, running to left and to right, for tractors with reversible driving (return device))
  • Wood- taking rake for model 1250 - 1500 (Picture B
  • Wood- taking rake for Model 1750 - 2000 (Picture B)
  • Wood- taking rake for Model 2250 - 2750 (Picture B)
  • Double case and strengthened front and back rolls 1250 – 2000
  • Double case and strengthened front and back rolls 2250 – 2750
  • System of irrigation for the elimination of the grass on the lines (one- side) - tank 100 l (Picture C)
  • Electro- valves for opening / closing of herbicide jets
  • Hydraulic conveyer of cut wood with tubes of attachment and rapid clutches (Picture D)
  • Cardan shaft Special rotor shaft with 6 rows of Y – blades